Print 86 comment(s) - last by Gestahl.. on Jan 14 at 3:24 AM

European Space Agency engineer Age-Raymond Riice as developed a remarkably simple way to propel a space elevator upward with a series of rhythmic jerks.  (Source: BBC)
A new method could help realize dreams of a space elevator

A space elevator has been a long standing dream of many in the science and tech community.  Conceived by Russian scientist Konstantin Tsiolkovsky in 1895 and popularized by author Arthur C. Clarke, many believe the idea holds a great deal of real world promise, and may eventually provide the cheapest way to transport people and goods into space.  With many countries such as Japan, the ESA, and the U.S. finally getting serious in a race to become the first nation to develop a space elevator, enthusiasm is at a high.

Unfortunately, though, much of the materials and methods needed to build such an elevator are infeasible.  While carbon nanotubes could allow for a cable strong enough to hold a space elevator in theory, one key problem is how to propel the elevator along the cables into space.

Among the previously suggested methods of powering the climber into space were beaming microwave or laser power, or even concentrated solar power to the climber; but all these efforts have a long ways to go before being close to being feasible.

However, a remarkably simple idea proposed at the Second International Conference on Space Elevator and Tether Design in Luxembourg could hold the key to powering the space elevator.  European Space Agency ground station engineer Age-Raymond Riise showcased a remarkably simple propulsion method which uses a series of rhythmic jerks to propel a device upwards along a taut cable.

For his demo he tied brushes with their bristles pointing down, representing the elevator cabs around the broom stick, representing the elevator cable.  As the brushes pointed downward, they required less force to slide up than to slide down.  The assembly slid up and down along the broomstick, but experienced a net upwards motion, slowly climbing to the top of the broomstick.

The novel new method holds great promise as similar jerking motion could be applied to raise the elevator on a full-sized design, in theory.  The key technical challenge would be designing a cable strong enough to withstand the heat and forces exerted on it by the atmosphere. 

However, advocates argue that with payload costs still remarkably high, the financial and social incentives for building a space elevator are enormous.

Building a space elevator could enable novel new industries.  Describes Benoit Michel of the Catholic University of Leuven, a conference attendee, "From my point of view, the space elevator project is important because it enables a far more directly useful project - installation of large space solar power satellites around the Earth to provide continuous, cheap, CO2-neutral, environmentally friendly energy.  I firmly believe that the next century will have a large space-based industry and that industry will be the main energy provider for the whole mankind."

Mr. Riise has been approached by commercial aerospace terms about his idea and is in talks with them over terms.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Orbital Towers
By Rivenburg on 1/6/2009 4:02:11 PM , Rating: 2
hey someone with a brain AND an education.

Yes after midpoint the centripetal force would propel you out & slowing down would be an issue.

what most people miss about this structure is that it WONT BE PRIMARILY FOR GETTING INTO SPACE.
It will primarily be a superconducting power link to the earth from a massive ring of solar sats at the 26000 mile Geo-sych point.

Power for the climbing wont be an issue, just grab a tiny piece of the insanely intense electrical field a few meters away via magnetic field it will generate. Super conducting materials allow almost NO penetration of themselves by magnetic fields thus they would have one from this powerful a current on the outside of the cable.
In a real life space tower, powering the lift wont be a problem.

Now lets discuss the movement of a 26000 mile long cable massing more then several cities worth of sky scrapers.
BZZZT, non-starter. The energy involved is insane. Complete power loss on each stroke up in the gigajoules range. This will turn to heat at some point & be a real mess.

The only way to use this method is to have a VERY small secondary cable to vibrate up & down AND it has to be powered from the space end so it's pulling not pushing. fortunately thats where all the free power is.

chances are the midpoint will be a station that allows the car to be reversed for the second half of each trip to keep the appearant local "down" on the floor and to control the climb/decent.

"Well, there may be a reason why they call them 'Mac' trucks! Windows machines will not be trucks." -- Microsoft CEO Steve Ballmer
Related Articles

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki