backtop


Print 55 comment(s) - last by Fracture.. on Aug 19 at 4:12 PM

The future of solar is looking much brighter

Solar power is taking off around the world.  Europe is planning to deploy various types of solar power to the Sahara to provide for the European Union's energy needs.  Meanwhile, here in the U.S., California is expanding its solar efforts as well.

However, amid the progressing adoption of solar technology, one perpetual criticism that persists is that solar power is inefficient and expensive.  To some extents this is true.  The current generation of photovoltaic solar panels -- the type of solar power perhaps most associated with the field -- is only around 20 percent efficient and thus costs remain relatively high, like many forms of alternative energy.

A new breakthrough from U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is looking to solve those problems.  It pushes solar cells to uncharted technology with a record 40.8 percent efficiency.  The new work shatters all previous records for photovoltaic device efficiencies.

The researchers first used a special type of cell, an inverted metamorphic triple-junction solar cell.  The custom cell was designed, fabricated, and independently measured at NREL.  The next step was to expose the solar cell to concentrated light of 326 suns, yielding the record-breaking efficiency.  A sun is a common measure in the solar power industry which represents the amount of light that hits the Earth on average.

The new cell targets a variety of markets.  One potential market is the satellite solar panel business.  Satellites natural absorb more intense sunlight, thanks to no atmospheric interference.  Another possible application is deployment in commercial concentrated PV cells.  Concentrated PV is a burgeoning field, with several companies currently contracted worldwide to build the first utility grade plants.

The new record was welcome news, but little surprise at NREL -- they held the previous record as well.  In order to beat their old design, one key was to replace the germanium wafer at the bottom junction with a composite of gallium indium phosphide and gallium indium arsenide.  The mixture splits the spectrum into three parts, each of which gets absorbed by one of the junctions.  Both the middle and bottom junction become metamorphic in the new design.  This means their crystal lattices are misaligned, trapping light in the junction and absorbing more of it.  This yields an optimal efficiency.

One key advantage is the new solar cell can be conveniently processed by growth on a gallium arsenide wafer.  It is also both thin and light.  The NREL believes this cell will be cheaper than current commercial models, while delivering far more power.

Some of the credit for the work goes to NREL's Mark Wanlass, who invented the cell's predecessor.  The new cell was redesigned by a team led by John Geisz.

The NREL is operated by the DOE by Midwest Research Institute and Battelle.



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: One thing I don't get...
By PKmjolnir on 8/18/2008 8:10:20 AM , Rating: 2
You think 100m² of top grade super efficient photovoltaics really would come cheaper than 0,3m² of said PVs and 100m² of light gathering optics?


RE: One thing I don't get...
By masher2 (blog) on 8/18/2008 9:47:12 AM , Rating: 2
Normally it is more expensive, yes. A solar cell receiving 300+ suns of heat needs active cooling just to survive, and even still it's lifetime is shortened. It also needs a tracking mechanism as the optics tend to have a low angle of acceptance.

Furthermore, these ultra-efficient concentrating cells are made from multi-junction PVs, which are substantially more costly than your more typical cells.


RE: One thing I don't get...
By blaster5k on 8/18/2008 9:55:19 AM , Rating: 2
This is the comment I was waiting for -- the other side of the story. You know what they say about things that sound too good to be true.


RE: One thing I don't get...
By JasonMick (blog) on 8/18/2008 11:30:57 AM , Rating: 2
Not necessarily -- an Aussie company Sungri claims that it uses a nanotech material cooling mechanism to allow its cells to endure 3,000 F temperatures. They say their system will provide solar power at a cost of 5 cents per kilowatt hour within a year.

Source:
http://cleantechnica.com/2008/05/10/solar-power-go...

They may not achieve their ambitious goals, but they're either onto something or making a lot of big claims.

Also pared down models with lower concentrating factors, while sporting lower efficiencies should be able to survive their operational temperatures without elaborate cooling and offer more modest decreases in solar costs over traditional PV.

You're absolutely right that there's obstacles, but there's also a lot of progress in the field of concentrated PV, you must admit.


RE: One thing I don't get...
By kattanna on 8/18/2008 11:45:54 AM , Rating: 5
quote:
cells to endure 3,000 F temperatures.


if they are getting those temps, wouldnt it be more effective to be converting that heat into making steam to drive a turbine instead of trying to cool a small PV cell capturing the light?


RE: One thing I don't get...
By 306maxi on 8/18/2008 11:53:31 AM , Rating: 2
I was thinking that myself.


RE: One thing I don't get...
By masher2 (blog) on 8/18/2008 12:22:16 PM , Rating: 2
> "an Aussie company Sungri claims that it uses a nanotech material cooling mechanism..."

A) This is just a claim so far.
B) Cooling is still required; it's just (supposedly) done by a somewhat cheaper method.
C) Active tracking is still required.
D) Multi-junction cells are still required.
E) Concentrating PV doesn't work in cloudy conditions, whereas normal PVs produce at least a fraction of peak power.

So far, concentrated PV being feasible for commercial power generation is still just a pipe dream. It'll take much, much more than a 0.1% increase in efficiency to realize such a solution.


"This week I got an iPhone. This weekend I got four chargers so I can keep it charged everywhere I go and a land line so I can actually make phone calls." -- Facebook CEO Mark Zuckerberg














botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki