Print 123 comment(s) - last by deadweasel.. on Jul 8 at 1:44 PM

The dish is composed of a set of 10 inch by 12 foot curved mirrors, like the one seen here. The students easily mount the mirrors to the aluminum framework using simple hardware like washers and zip ties.  (Source: MIT)

The mirrors incredible power makes short work of a beam of wood, disintegrating it in flames and smoke. The focal point can melt steel.  (Source: MIT)
New solar dish from MIT concentrates sunlight intensely enough to melt steel

The solar industry is booming.  With waves of investment and grants, the solar power industry is for the first time becoming a serious business.  New power plants will soon be pumping power out to consumers, while other firms market to sell panels directly to the consumer, providing them with a more direct means of experiencing solar energy.

There are many forms of solar power technology.  Today the most dominant is photo-voltaics, which comprise the traditional solar panels that come to mind when one thinks of solar power.  However, there are other promising ways of capturing the sun's energy that are merely less developed.

Among these is a parabolic collector.  A parabolic collector consists of an array of mirrors focused on a singular point, which they heat to a high temperature.  By placing water or another liquid at the collector, energy can be stored in the form of a phase transformation, and later harvested through a turbine generator.

However, parabolic collectors are still a relatively new field of research.  Their true potential remains relatively unknown.  A glimpse of it was provided by a research team at MIT, which developed a new parabolic collector design, which will blow away current solar power designs in terms of efficiency.

The MIT team believes that their lightweight, inexpensive device holds the promise of revolutionizing the power industry and providing solar power to even remote regions.

The key piece is the 12-foot dish, which the team assembled in several weeks.  The design is exceedingly simple and inexpensive.  The frame is composed of aluminum tubing and mirrors are attached to it.

The results are staggering -- the completed mirror focuses enough solar energy at its focal point to melt solid steel.  The energy of typical sunlight is concentrated by a factor of 1,000.  This was showcased during a demonstration, in which a team member held up a board, which instantly and violently combusted, when brought within range of the focal point.

By directing the dish at a more practical target -- water piped through black tubing -- steam can be flash created, offering instant means of producing energy or providing heating. 

Spencer Ahrens, who just received his master's in mechanical engineering from MIT, was among the designers of the dish.  He and his fellow team members are serious about marketing it, and leveraging its cheap cost and easy production.  They have founded a company named RawSolar.  They say their design is easily mass producible and that they hope to be pumping out 1,000 of dishes in years to come.

The new dishes would return their costs in a mere couple years, unlike standard photo-voltaic installations which can take 10 years or more to return their costs.  This improvement is critical to providing practical economic justification for adoption.

The dish is based partly on components invented and patented by inventor Doug Wood.  He was so pleased with the team's work that he signed over rights to the components to the team.  He elates, "This is actually the most efficient solar collector in existence, and it was just completed.  They really have simplified this and made it user-friendly, so anybody can build it."

Wood says one of the keys to the success of the project is the smaller size.  Dishes are affected by the same weight dynamics that effect living organisms.  Much as large living organisms would need an inordinate amount of weight support and thus are not favored, larger dish designs fall short in that they require an exponentially greater amount of infrastructure.  For example, a dish the size of the RawSolar team's design costs only a third of what a larger dish would cost.

MIT Sloan School of Management lecturer David Pelly gave a guiding hand to the students and thinks the economic upsides of the technology are impressive.  He states, "I've looked for years at a variety of solar approaches, and this is the cheapest I've seen. And the key thing in scaling it globally is that all of the materials are inexpensive and accessible anywhere in the world.  I've looked all over for solar technology that could scale without subsidies. Almost nothing I've looked at has that potential. This does."

The ability to build unsubsidized, profitable, and easy to manufacture solar power will truly be something amazing.  This should be an exciting technology to follow as it is marketed and further developed.

Besides Ahrens, the other students primarily working on the project were Micah Sze (Sloan MBA '08), UC Berkeley graduate and Broad Institute engineer Eva Markiewicz, Olin College student Matt Ritter and MIT materials science student Anna Bershteyn.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Mythbusters
By TheBaker on 6/22/2008 12:35:02 AM , Rating: 2
Yeah, but if you don't use curved mirrors you get a "stack" of flat panels of light, rather than a true parabolic reflector.

That is, the energy is focused into a (for example) 12" x 12" square rather than a 1" x1" (or smaller) area. The energy in the large square would make something really hot, while that same energy in the small square would be 144 times more powerful, and would burn things to a crisp. Make it a true parabola and the energy is condensed to a point source. Eventually, you get what these kids at MIT came up with.

They didn't do anything new, they just did it with more precision and efficiency than before.

RE: Mythbusters
By masher2 on 6/22/2008 12:46:14 PM , Rating: 5
Even a mathematically perfect parabolic reflector won't focus to a light to a single point. The minimum focus size is defined by many factors: aperture (size) of the reflector, wavelength of the reflected light, visual size of the sun or other psuedo-point source, etc.

So in reality, nothing is a "true"parabola. If a stacked mirror such as this contained, say, 1000 flat segments, the intensity at the focus could be as strong as 500X normal solar flux....certainly hot enough to ignite wood.

RE: Mythbusters
By blue7053 on 6/26/2008 6:48:06 PM , Rating: 2
The embarassing thing about this is the number of people who are amazed by it. 'The kids' at MIT didn't do it, some guy in Iowa did it and showed them where to buy 12' mirrors. There is absolutely nothing new here except the knowledge of the melting point of steel. Even there, they don't enumerate it. They just wave in the general direction.

RE: Mythbusters
By achintya on 6/22/2008 1:54:23 PM , Rating: 3
Yeah, but after a point, if you scale the piecemeal 'parabolic' mirror up it slowly starts achieving the shape of a true parabola. Basic geometry. Even a polygon with enough sides starts looking something like a circle. Think of a polygon with over 20 sides. Looks enough like a circle anyways. Most new large telescopes are made the same way by assembling many small straight pieces.

RE: Mythbusters
By someguy743 on 6/22/2008 3:39:16 PM , Rating: 2
Wow, this new solar thermal technology really could be revolutionary. I'd like to know what the "solar to grid conversion efficiency" number is for this solar thermal dish. Stirling Energy already makes a larger sized one that looks similar. It set the record for efficiency at 31.25%:

If Raw Solar's solar dish is a lot more efficient than Stirling Energy's AND it is a lot cheaper to manufacture and deploy in the field then these MIT guys might be sitting on a gold mine. Big Coal and the other fossil fuel industries won't like this one bit. :) It really could reach and exceed the price per kilowatt that coal is now. Now ... if only the solar thermal industry can get some really cheap energy storage technology to come out, they've got the world by the tail.

Cheaper energy storage and cheaper transmission lines are all that's standing in the way of solar thermal, photovoltaic and wind from becoming the dominant energy sources in the next 20 years ... in a super efficient and flexible "smart grid". I bet it's going to happen. The dream might soon be realized. Inexpensive, inexhaustible, non polluting clean energy that will NEVER run out and cannot be manipulated nearly as much by the Wall Street schemers and Big Oil, etc. :)

RE: Mythbusters
By masher2 on 6/22/2008 3:54:04 PM , Rating: 3
> "Stirling Energy already makes a larger sized one that looks similar. It set the record for efficiency at 31.25%:"

Concentrating solar cells already exist which have efficiencies in excess of 40%. They're still far more expensive than coal or nuclear.

RE: Mythbusters
By Denithor on 6/23/2008 9:00:44 AM , Rating: 2
Inexpensive, inexhaustible, non polluting clean energy that will NEVER run out and cannot be manipulated nearly as much by the Wall Street schemers and Big Oil, etc.

...which is exactly why it likely won't happen for several years.

RE: Mythbusters
By jskirwin on 6/27/2008 3:50:36 PM , Rating: 2
Inexpensive, inexhaustible, non polluting clean energy that will NEVER run out and cannot be manipulated nearly as much by the Wall Street schemers and Big Oil, etc.

Electricity gets manipulated all the time by Wall Street schemers (Is that what some call investors nowadays?) Enron did it to California in 2001.

RE: Mythbusters
By blue7053 on 6/26/2008 7:11:25 PM , Rating: 2
I don't know whether this is new or not, nevertheless I worked it out 20 years ago. Showed it to a country neighbor once, he said, "Oh yeah. I read about that in a magazine."

Forming the Greek parabola:
Start with a 4x8 sheet of plywood, drive a nail in lower left corner of the long side.
Tie one end of an 8' string to the nail, double the string, (now 4') and put your pencil in the loop of the string.
Hold one end of the string at the nail and the other end with the pencil at the upper left side of the plywood.
Move the free end of the string along the bottom side of the plywood and the pencil to the right, maintaining a right triangle relationship between the nail, the pencil and the free end of the string.
As you move the pencil and the free end of the string to the right, you will be drawing a curved line describing the point of the opposite side and the hypotenuse. As the opposite side of the triangle moves away from the nail, the opposite side diminishes as the base and the hyoptenuse increase. The relationship amoung the sides remains constant.
When you end up with your 8' string at the lower right corner of the plywood, you will have half a parabola described across the sheet of plywood. The focal point is the nail.

RE: Mythbusters
By lco45 on 6/23/2008 4:07:22 AM , Rating: 2
A stack of flat mirrors is the same as one curved mirror, if you know your calculus.

A curve is just a bunch of straight lines, with the length of each line tending towards zero.

The greeks understood calculus, although not to the degree the Newtonians took it. Google "squaring the circle" for info on an early greek take on calculus.


RE: Mythbusters
By masher2 on 6/23/2008 11:24:17 AM , Rating: 2
More precisely, a curve can be considered a set of infinitely short line segments. There is a difference between a stack of flat mirrors and a curve...but that difference tends to zero as the size of the mirrors decreases.

And 'squaring the circle' isn't calculus. It's the equivalent problem to finding the area bounded by a curve, a problem which can also be solved by integral calculus..

"If they're going to pirate somebody, we want it to be us rather than somebody else." -- Microsoft Business Group President Jeff Raikes

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki