Print 48 comment(s) - last by dever.. on Mar 11 at 2:52 PM

These rolls, while bearing an uncanny resemblance to "Fruit by the Foot", are actually commercial grade solar photovolatics printed by inkjet printer via Konarka's new process.  (Source: Konarka Technologies, Inc.)

A sheet of the material can charge a laptop on the go -- either indoors or out.  (Source: Konarka Technologies, Inc.)
Want power? Just print it!

Solar power admittedly has obstacles to overcome.  Photovoltaics require glass and are relatively expensive.  Trough and solar tower setups typically need to adopt advanced design features, such as those of the new proposed Arizona 280 MW desert plant.  These design features add to the moving parts total, make maintenance more complex, and most importantly raise the cost.  Other solar setups such as photosynthetic hydrogen production and solar nanowires hold great promise, but are currently too far away from being a realizable commercial solution.

So what is the answer to providing cheap solar power, power that can rival even the efficiency and cost of nuclear energy?   One idea floated around in the past has been to print solar cells using inkjet printers.  However such a process remained in the realm of pure research -- until now. 

Massachusetts-based Konarka Technologies, Inc, a company with a healthy history of commercial experience, developed and demonstrated a commercial-grade process for printing cells on inkjet printers.  All quips about inkjet cartridge costs aside, the new process holds tremendous potential to revolutionize the solar photovoltaic industry.

Konarka demonstrated the technology publicly and published its research that backs the process in Advanced Materials, entitled, “High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends” by Konarka researchers Dr. Stelios A. Choulis, Claudia N. Hoth, Dr. Pavel Schilinsky and Dr. Christoph J. Brabec.

Typical photovoltaics require a clean room to maintain the delicate manufacturing conditions necessary in order to carry out silicon spin coating and other steps in the manufacturing process.  These clean rooms are extremely expensive to build and maintain.  While traditional photovoltaics can be profitable, Konarka's inkjet phtovoltaics promise to dramatically lower their cost, making solar power suddenly very competitive in terms of energy production per installation cost.  Better yet, it will likely reduce the time it takes to produce the cells and allow for easier expansion of capacity.

Rick Hess, president and CEO, states, "Demonstrating the use of inkjet printing technology as a fabrication tool for highly efficient solar cells and sensors with small area requirements is a major milestone.  This essential breakthrough in the field of printed solar cells positions Konarka as an emerging leader in printed photovoltaics."

The new solar cells use an organic bulk heterojunction, as opposed to the non-organic designs of traditional solar cells.  The new organic-ink has the advantage of being deposited easily on a number of different substrates, unlike traditional inorganic semiconductor doping which can only be applied easily to a limited number of inorganic semiconductors.  Konarka looks to deploy this technology in what it calls Power Plastic® -- flexible plastic power producing sheets.  One intriguing feature of the plastics is that Konarka can offer flexible plastic solar panels with printed patterns -- such as bricks or camouflage, which although taking a slight hit on efficiency, could be an intriguing prospect for non-intrusive installation.  The military already has contracted the company to build a series of camouflaged power-generating buildings.

Konarka plans on marketing the new tech to power laptops, cell phones, and more.  The solar cells work with the full spectrum of visible light, so they can be charged indoors, not just in sunlight.  Konarka advertises that a sheet not much bigger than a couple pieces of notebook paper could charge a laptop, when you're on the go.

While Konarka still has to prove itself before maintaining a place among the greats of alternative energy, its process sure seems innovative.  If the company is a success, perhaps in a couple years the solution to the energy crisis will be as simple a print job away.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

imagine the possibilities...
By eyebeeemmpawn on 3/7/2008 12:16:07 PM , Rating: 5
I can't wait until I build a giant paper airplane with an electric motor and fly myself to work with it. I hope it doesn't rain that day :)

RE: imagine the possibilities...
By i3arracuda on 3/7/2008 12:21:55 PM , Rating: 5
I can't wait to waste a quarter of the ink on printing the alignment page.

RE: imagine the possibilities...
By stirfry213 on 3/7/2008 12:50:13 PM , Rating: 5
Better yet, you print out your resume and realize you forgot to swap your ink cartradges and paper!

Though, maybe your new boss would find your resume electrifying!

RE: imagine the possibilities...
By shamgar03 on 3/7/2008 1:05:58 PM , Rating: 5
Dude......puns like that deserve jail time.

RE: imagine the possibilities...
By winterspan on 3/7/08, Rating: -1
By 4wardtristan on 3/8/2008 1:26:20 AM , Rating: 3
hahah thanks for the laugh made my average day good :D

RE: imagine the possibilities...
By HakonPCA on 3/7/2008 3:11:05 PM , Rating: 5
ink jet ink, currently about ~$7000-8000 a it, thanks HP et all

RE: imagine the possibilities...
By daftrok on 3/8/08, Rating: -1
RE: imagine the possibilities...
By dever on 3/8/2008 2:18:44 PM , Rating: 5
You are free to compete if you think you can do better. But, that would shatter your conspiracy theories.

RE: imagine the possibilities...
By rebturtle on 3/9/2008 3:34:52 AM , Rating: 3
So apparently you propose that the brilliant inventors of today should invest millions in R&D as well as considerable portions of their time/life, and then not patent it and be repaid? Should we just e-mail China, Malaysia, Pakistan, etc. with all our ideas rather than bothering with all the reverse-engineering and having our ideas & jobs stolen over time? Perhaps we should stop inventing and let the rest of the world "catch up." Meanwhile you can continue purchasing some knock-off lead-based toys fresh off the ultra-mass production child labor line at you local discount store!

RE: imagine the possibilities...
By Optimizer on 3/9/2008 12:47:22 PM , Rating: 4
"The acquisition of wealth is no longer the driving force in our lives. We work to better ourselves and the rest of humanity."

RE: imagine the possibilities...
By acer905 on 3/10/2008 12:05:47 PM , Rating: 2
Hopefully we will be able to get to that mindset without the devistating 3rd world war...

RE: imagine the possibilities...
By dever on 3/11/2008 2:52:16 PM , Rating: 2
You know, I'm a Star Trek fan to a degree, but that statement could have just as easily come from Marx. Here's a better quote for you:

"We have realized that the choice to freely persue rewards, such as wealth, underlies the betterment of humanity."

"DailyTech is the best kept secret on the Internet." -- Larry Barber

Most Popular Articles5 Cases for iPhone 7 and 7 iPhone Plus
September 18, 2016, 10:08 AM
Laptop or Tablet - Which Do You Prefer?
September 20, 2016, 6:32 AM
Update: Samsung Exchange Program Now in Progress
September 20, 2016, 5:30 AM
Smartphone Screen Protectors – What To Look For
September 21, 2016, 9:33 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki