Sheets of Cheap Carbon Nanotubes Now a Reality
March 3, 2008 12:33 PM
comment(s) - last by
No shadows and mirrors -- a Nanocomp employee poses next to a 3x6 ft sample mesh composed of randomly overlapping millimeter long carbon nanotubes.
(Source: Nanocomp Technologies)
The birthplace of the nanotube sheets is Nanocomp's high-tech tube-processing "Big Box", which can churn out a full-sized sheet per day.
(Source: Nanocomp Technologies)
Company makes 3x6 ft carbon nanotube sheets, 100 sq. ft. sheets by the end of the summer; possible uses include consumer electronics, aircraft, and spacecraft
are like a materials scientists' dream come true --
high strength to weight ratio
, and flame resistance orders of magnitude higher than many commonly used materials.
However, in the past, while these tiny tube-molecules composed carbon atoms were raved about by researchers, plans for practical applications remained largely in the realm of fantasy. The chief problem was the
"nano" part of the nanotubes
-- these tiny tubes would need to be scaled to visible-sized pieces of material in order to be utilized in many practical devices. Such scaling had enjoyed little previous success, and was seen as a major roadblock to putting the ubiquitous nanotubes to work.
breakthrough from Nanocomp Technologies
, a New Hampshire startup, promises to provide sheets composed of carbon nanotubes on an unprecedented scale. Using nanotubes measuring in the tens of nanometers, Nanocomp produces sheets of carbon nanotubes measuring 3 by 6 feet. Better yet, by the end of the summer the company is promising slabs of 100 square feet or more.
Nanocomp says that the days of waiting for nanotubes materials to be manufactured on a usable scale are over. The company is taking production seriously, and is not looking to remain in the realm of pure research. Says CEO and co-founder of Nanocomp, Peter Antoinette, "From the get-go, we wanted to build something that would be manufacturable. We’re out to make value-added components out of that material."
The hardest part about making nanotube materials is growing long enough tubes. Nanocomp makes a powder of tubes that are approximately 1 mm, a relatively long length. In a highly secretive process Nanocomp takes a carbon source such as ethanol or methanol, heats it and flows it past a nanoparticle catalyst, which experts speculate to possibly be an oxide of nickel, cobalt or iron. The carbon molecules react with the catalyst, powered by the heat, forming a nanotube. The size of the catalyst correlates to the size of the nanotube formed.
The big hurdle was maintaining a large enough catalyst, keeping it stable enough for millimeter long tubes to grow. Antoinette says that in order to achieve this, Nanocomp uses an advanced computer controlling 30 different parameters in the process, including temperature, temperature gradient, gas flow rates, and the chemical composition of the mix. Using this precision control, researchers can both control the desired tube length and select from single-walled or multi-walled tubes. Mr. Antoinette states, "We can dial it in."
The resulting nanotubes are arranged randomly overlapping into the large final sheets. To give an idea of the sheet's strength, it has a tensile strength of 200 to 500 megapascals -- aluminum has a strength of approximately 500 megapascals. Better yet, if Nanocomp moves from a random alignment to an organized alignment, the nanotube material could have a tensile strength as high as 1,200 megapascals.
Antoinette comments that Nanocomp is heavily marketing the material to consumer electronics manufacturers and is receiving substantial interest. In cell phone handsets, the material could help to provide protection against stray signals, thanks to its superior
shielding against electromagnetic interference (EMI)
. This could yield clearer sound and reception. Also under consideration is the the use of the material
and laptops. The material would provide such portable electronics with both heat dissipation from their chipsets and processors and EMI shielding from unwanted signals, via its randomly aligned nanotubes. Better yet, smaller strips of
could act as powerful antennas, grabbing wireless signals for superior network reception and transmission.
Nanocomp wants to eventually use the material in composites similar to the carbon-composite used to build the new Boeing 787 jets. Current composites can't conduct electricity making them vulnerable to lightning strikes. Nanotube composites could safely channel strikes to harmless locations, protecting the aircraft's electronics. As an added benefit, current could be run through the nanotubes to heat up the aircraft body, and provide additional de-icing capabilities.
Antoinette points out that most of aerospace industry still uses pure copper wire for its conductors -- virtually the same copper wire used since the 1850s. His company's nanotubes could replace this material with better conducting nanotubes, which weigh a mere 20 percent as a much as the copper wiring per volume. Antoinette adds, "Copper wire is still the conductor of all our satellites, all our aircraft."
He points out that a current 747 jet has two tons of copper wire aboard -- a weight cost that could be cut in half by the use of nanotubes. He says, "you’re talking literally millions of dollars of savings in fuel costs over the life of an airplane."
Boeing, Lockheed Martin, and Northrop Grumman are, needless to say, very excited about the potential for the new large scale material. They have already qualified Nanocomp as a vendor and are currently receiving and testing samples of the material from Nanocomp. In hopes of meeting these and other industry leaders demands, after the 100 sq. ft. samples are complete, Nanocomp plans on focusing its efforts on having a pilot-plant running by 2010, with full scale production by 2012.
David Lashmore, Nanocomp co-founder and Chief Technology Officer, pioneered the material assembly process. The other co-founder was Robert Dean, a former engineering professor at Dartmouth who started Synergy Innovations, a high-tech incubator in Lebanon, NH. The pair joined with Antoinette to start up the exciting new firm. They've received a $2.5M USD contract from the U.S. Army and a Small Business Innovation Research grant from the Air Force. They are currently raising additional private financing. To protect itself legally, Nanocomp has signed a non-exclusive license with IBM for IBM's single-wall nanotube process. With 16 of its own patents, Nanocomp looks to safeguard its own prospects as well.
This article is over a month old, voting and posting comments is disabled
3/4/2008 10:19:40 AM
Pardon the cliche, but source? No link needed, a name of a book would be best.
"If they're going to pirate somebody, we want it to be us rather than somebody else." -- Microsoft Business Group President Jeff Raikes
Thinking Small: New Intel Architecture Champions Sub 1 Watt x86
March 2, 2008, 8:12 PM
It Cuts Both Ways: American Majority Deems Nanotechnology Immoral
February 23, 2008, 1:57 AM
Military Goes For Stealthy Kills With Ultra-Black Nanotubes
February 22, 2008, 10:37 AM
Scientists Design 1GHz CMOS Circuit Using Carbon Nanotubes
February 15, 2008, 3:10 PM
Scientists Develop Ingenious Method for Nanotube Alignment
January 25, 2008, 10:46 AM
Texas Chosen as Site for SpaceX's First Commercial Launchpad
August 5, 2014, 1:44 PM
South Carolina Prison Finds Crashed Drone Carrying Drugs, Phones
August 1, 2014, 2:49 PM
NASA's Mars 2020 Rover Gains Seven New Instruments for Exploration
August 1, 2014, 1:30 PM
NASA Opportunity Rover Breaks Record for Most Miles Traveled on Another Planet
July 29, 2014, 1:38 PM
Commercial Drones to Get Privacy Guidelines Via Executive Order
July 25, 2014, 5:34 PM
Pentagon's Priciest Project, F-35, Misses International Debut
July 25, 2014, 10:18 AM
Most Popular Articles
Lumia 830 Gets Major Upgrades Including New 20.1 Megapixel Toshiba Sensor
August 15, 2014, 6:00 PM
Windows Phone, BlackBerry Smartphone Market Share Falls to 2.5%, 0.5% Respectively
August 15, 2014, 9:44 AM
GM Concedes That the Cadillac ELR Doesn’t Really Compete with the Tesla Model S
August 15, 2014, 5:42 PM
Report: Windows 9 “Threshold” Tech Preview Coming Next Month
August 15, 2014, 11:29 AM
Apple Scores Patents, Preps New Reversible USB Plug for iPhone 6 Connector
August 18, 2014, 1:32 PM
Latest Blog Posts
Space Terrorism is a Looming Threat For the United States
Apr 23, 2014, 7:47 PM
Facebook Aims to Provide Internet to "Every Person in the World" with Drones, Satellites
Apr 1, 2014, 10:20 AM
Retail Mobile Sites Experience Outages in Light of Simplexity's Bankruptcy
Mar 14, 2014, 8:48 AM
Tesla vs. BMW: Who Has the Safer EV?
Feb 1, 2014, 2:56 PM
Justice Leaks Details of Next HTC One Two Flagship Phone
Dec 5, 2013, 4:04 PM
More Blog Posts
Copyright 2014 DailyTech LLC. -
Terms, Conditions & Privacy Information