Print 12 comment(s) - last by oab.. on Mar 3 at 11:16 PM

Intel's DX48BT2  (Source: Silicon Madness)
Intel updates its flagship high-end motherboard with the X48 chipset

This article was first published on

Intel will update its flagship high-end desktop motherboard, known as the DX38BT, or BoneTrail, with its X48 chipset. Intel guidance points to a Q2'08 release, possibly as early as April.

Planned to enter the market at the same time as the other competing X48 solutions, the DX48BT2 will feature the  ICH9R southbridge in place of the newer ICH10R, which hasn't been released yet. The ICH10 series will be reserved for motherboards like the DFI LanParty UT X48-T3R. This is an interesting move by Intel, since it allows Intel to offer its board partners a feature to differentiate themselves from standard Intel motherboards.

The X48 chipset is a carefully selected X38 variant that allows for a higher FSB. Since the X48 is pin-to-pin compatible with the X38, BoneTrail 2 wasn't redesigned and uses the same PCB as the DX38BT.

BoneTrail 2 features support for dual x16 PCI-Express 2.0 slots and possibly also allows to split one of the x16 slots in half to provide 8 lanes to the third PCI-Express slot, making available a 16-8-8 lane configuration. This feature, however, has not been officially confirmed by Intel.

Other known features are support for 8 SATA ports, a FSB 1600MHz and official support for DDR3-1600.

Intel has built some interesting high-end boards lately that although don't meet the needs of enthusiasts as well as the boards of companies like Asus and DFI, have proven to be more successful than previous in-house designs. For example, Intel's BadAxe 2 was a moderate success among overclockers - something not usual with Intel branded boards - due to its good build quality and refined BIOS options for overclocking. Intel's BoneTrail 2 may prove to be a success if Intel manages to follow its newly founded philosophy of catering to enthusiasts. 

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

By See Spot Run on 3/2/2008 10:46:33 PM , Rating: 1
Other known features are support for 8 SATA ports, a FSB 1600MHz and official support for DDR-1600

I'm thinking you forgot a little number... My DDR 550 seems pretty pokey compared to this stuff..

RE: typo
By TomZ on 3/3/2008 11:19:03 AM , Rating: 2
On a related note, does anybody know if this board can also support DDR2? I assume not, but I was curious if anybody knows for sure.

RE: typo
By ShadowZERO on 3/3/2008 4:36:44 PM , Rating: 2
Also: Wasn't it SkullTrail, not BoneTrail? Or am I thinking something else?

RE: typo
By ShadowZERO on 3/3/2008 4:39:10 PM , Rating: 2
Oh and what's wrong with DDR3@1600mhz? You are probably running DDR2@1100(550x2). DDR3 can easily reach 800x2=1600mhz.

RE: typo
By oab on 3/3/2008 11:16:34 PM , Rating: 2
Skulltrail was something else. It was the dual-socket FB-DIMM only really expensive thing.

"We can't expect users to use common sense. That would eliminate the need for all sorts of legislation, committees, oversight and lawyers." -- Christopher Jennings

Copyright 2015 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki