NIST Smooths Out "Roughness" Debate with High Tech Lasers
January 19, 2008 10:27 AM
comment(s) - last by
Testing sheet metals and stamping dies costs the automotive industry tons of cash, and it's all wrong, wrong, wrong
Sheet metal isn't high-tech stuff, but a lot of work goes into getting it right when it comes to things like the automotive industry. The surface of a stamped piece of metal is an indicator to the amount of stress it can handle and how, when and where it may fail. The standard method of measurement for surface profiling is being called into question for its accuracy after findings from a group of NIST researchers.
Traditionally, the measurements in question were done with an instrument called a profilometer. The simple device, similar to a phonograph needle, is drawn in a line over the surface of a material to measure the often microscopic terrain. After repeated tests, the data from the instrument is averaged to make a "roughness" measurement.
Unfortunately, as the NIST research shows, this method may be terribly inaccurate due to uncertainties and statistical errors when the measurements are extrapolated into a three-dimensional surface.
Rather than using a two-dimensional technique like the profilometer, Mark Stoudt, Joseph Hubbard and Stanley Janet of NIST use an instrument called a scanning laser confocal microscope to make a point-by-point image of a surface. The measured area from one image is roughly 1000 x 800 micrometers long and wide by 20 micrometers deep. The data from each point is then analyzed simultaneously using mathematical techniques to give a more accurate measurement than could be obtained by two-dimensional methods.
One discovery already made on aluminum alloy used in the study is that the generally accepted linear relationship between surface roughness and material deformation for the alloy is wrong. Data from the research suggests a more complicated relationship was hidden by the uncertainties of linear profilometers.
This and the rest of their findings have been published in a paper titled "Using Matrix Methods to Characterize Evolution of Deformation Induced Surface Roughness in Aluminum Sheet" in the journal
Materials Science and Technology
This article is over a month old, voting and posting comments is disabled
RE: A little exagerated...
1/21/2008 3:24:21 PM
Considering the things we can do with lasers these days, I was a little surprised that they weren't already used for this. Are they really using a mechanical measuring method on a single line and extrapolating that for an entire sheet?
"A lot of people pay zero for the cellphone ... That's what it's worth." -- Apple Chief Operating Officer Timothy Cook
Latest By Levi Beckerson
Of Turbines Large And Small
May 24, 2011, 9:07 AM
Various Alcohols Shown To Make Various Improvements on Specific Superconductor
January 11, 2011, 8:32 AM
Genetics and Taste Buds; Can Science Build Better Chocolate?
December 27, 2010, 9:01 AM
New UMass Technique Seeks to Replace Petroleum for Industrial Chemicals
November 26, 2010, 7:26 AM
New MIT Nanotech Fights Cancer Naturally
September 20, 2010, 8:30 AM
Genetic Modification Turns Killers Into Saviors
September 16, 2010, 1:13 PM
New Rensselaer Nanocomposite Kills Staph
August 17, 2010, 8:10 AM
Researchers Create Nanoscale Particles For Ultrasound Applications
August 16, 2010, 3:44 PM
NCSU Study To Help Understand Nanoparticles Inside the Body
August 16, 2010, 8:38 AM
New Lithium Metal Phosphate Batteries Made With Wax and Soap
August 13, 2010, 1:10 PM
Microsoft Co-founder Paul Allen Donates $100M to Fight Raging Ebola Epidemic
October 23, 2014, 6:05 PM
Cool Science Video of the Day: Carnivorous Leech Eats Giant Jungle Worm
October 16, 2014, 6:44 PM
Facebook CEO and Founder, Mark Zuckerberg, Donates $25M to Fight Ebola
October 14, 2014, 5:06 PM
Chagrined Over Leaks, CDC Confirms First U.S. Ebola Diagnosis in Dallas, Texas
September 30, 2014, 5:55 PM
Nail Polish May Soon be Able to Detect Date Rape Drugs
August 26, 2014, 7:57 AM
SpaceX Falcon 9-R Rocket Suffers Malfunction, Self-Destructs During Test Flight
August 23, 2014, 9:36 AM
Most Popular Articles
Amid Theater Boycott Netflix Defiantly Plans New Movies, Plus 3 TV Shows for 2015
October 24, 2014, 7:30 PM
AT&T Defeats Purpose of New Apple SIM, Locks iPad Air 2 SIMs to Its Network
October 24, 2014, 2:17 PM
CVS, Rite Aid Kill Unofficial Apple Pay Support, Burn Google Wallet Users in the Process
October 25, 2014, 5:26 PM
1 Million Credit Card Activated on Apple Pay Within 72 Hours, Walmart CEO Hopes Visa "Suffers"
October 28, 2014, 8:17 AM
Microsoft's Figures Show Desktop Users Flocking to Windows 10 Preview
October 27, 2014, 11:04 AM
Latest Blog Posts
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
Space Terrorism is a Looming Threat For the United States
Apr 23, 2014, 7:47 PM
More Blog Posts
Copyright 2014 DailyTech LLC. -
Terms, Conditions & Privacy Information