NIST Smooths Out "Roughness" Debate with High Tech Lasers
January 19, 2008 10:27 AM
comment(s) - last by
Testing sheet metals and stamping dies costs the automotive industry tons of cash, and it's all wrong, wrong, wrong
Sheet metal isn't high-tech stuff, but a lot of work goes into getting it right when it comes to things like the automotive industry. The surface of a stamped piece of metal is an indicator to the amount of stress it can handle and how, when and where it may fail. The standard method of measurement for surface profiling is being called into question for its accuracy after findings from a group of NIST researchers.
Traditionally, the measurements in question were done with an instrument called a profilometer. The simple device, similar to a phonograph needle, is drawn in a line over the surface of a material to measure the often microscopic terrain. After repeated tests, the data from the instrument is averaged to make a "roughness" measurement.
Unfortunately, as the NIST research shows, this method may be terribly inaccurate due to uncertainties and statistical errors when the measurements are extrapolated into a three-dimensional surface.
Rather than using a two-dimensional technique like the profilometer, Mark Stoudt, Joseph Hubbard and Stanley Janet of NIST use an instrument called a scanning laser confocal microscope to make a point-by-point image of a surface. The measured area from one image is roughly 1000 x 800 micrometers long and wide by 20 micrometers deep. The data from each point is then analyzed simultaneously using mathematical techniques to give a more accurate measurement than could be obtained by two-dimensional methods.
One discovery already made on aluminum alloy used in the study is that the generally accepted linear relationship between surface roughness and material deformation for the alloy is wrong. Data from the research suggests a more complicated relationship was hidden by the uncertainties of linear profilometers.
This and the rest of their findings have been published in a paper titled "Using Matrix Methods to Characterize Evolution of Deformation Induced Surface Roughness in Aluminum Sheet" in the journal
Materials Science and Technology
This article is over a month old, voting and posting comments is disabled
RE: Like the title
1/21/2008 12:03:59 AM
rofl, sadly it's true, yet personally i think it's these people that NEED to be politicians. These are the people that understand information thrown at them. Out idiot lawyer politicians only know how to sue people and sign papers when it comes down to it. How can we solve big issues like global warming if our politicians are dumb enough to believe it even exists?
RE: Like the title
1/21/2008 2:55:54 AM
I've met several politicians, I think that general theory of them is wrong. I think they're generally smart people, have to have some degree of intelligence in order to have cut a sufficient number of throats to even get elected.
Take for example, the current "stimulus package" deal. Democrats and Republican's, united for the first time in almost a decade with the goal of giving away money that isn't theirs to the masses; much like a Roman general returning to Rome with gifts for the people so that they would honor him with a triumph; this time, they just want votes in November. I bet you, though, that both parties are aware that it's ultimate impact will be virtually nil, that no one knows how to "fix" a business cycle, and that, besides, the root of the problem is in the financial markets anyway. That doesn't stop Republican's from trying to get in business depreciation benefits in, nor Democrats from trying to sneak in extra welfare money (though Bernanke did say the business benefits have more bang-for-the-buck, dont tell the left that, they dont care -- it wont get them elected!) Similar story in Europe; politicians know how to fix Europe's economic woes (Reaganomics, Ireland-style), just, as they often say, not how to get re-elected after they do it. Both of those being economic issues, I partly blame government educations that barely teach one how to balance a check book, much less look at marcoeconomic issues, but still.
Thats what it comes back to, though, the people and elections.Therefore.. I think the electorate are the idiots, not politicians. I don't care how miserable the weather was in Michigan, anybody note how low that turnout was for the primary? The politicians are slaves to the structure that we, the people, at least the fraction of us that vote, haphazardly create for them.
That said, they're not experts in many particular fields, but then again what does a scientist working at a biotech firm know about tax policy or defense anyway. Two of the worst presidents in United States history happened to be engineers; Hoover and Carter.
RE: Like the title
1/21/2008 8:47:52 AM
I've seen some great politicians lose elections because they lacked charisma. It's unfortunate, but many people vote for leaders on gut feelings and baby kissing, not issues.
I think the biggest strength of Democracy is it's greatest weakness - everyone gets to vote. If we could find a very to identify the idiots and take away their votes, you would see politics change dramatically for the better. Politicians would stop pandering to the morons of society and talk about real issues. At a minimum, political ad's on TV would at least disappear.
"The whole principle [of censorship] is wrong. It's like demanding that grown men live on skim milk because the baby can't have steak." -- Robert Heinlein
Latest By Levi Beckerson
Of Turbines Large And Small
May 24, 2011, 9:07 AM
Various Alcohols Shown To Make Various Improvements on Specific Superconductor
January 11, 2011, 8:32 AM
Genetics and Taste Buds; Can Science Build Better Chocolate?
December 27, 2010, 9:01 AM
New UMass Technique Seeks to Replace Petroleum for Industrial Chemicals
November 26, 2010, 7:26 AM
New MIT Nanotech Fights Cancer Naturally
September 20, 2010, 8:30 AM
Genetic Modification Turns Killers Into Saviors
September 16, 2010, 1:13 PM
New Rensselaer Nanocomposite Kills Staph
August 17, 2010, 8:10 AM
Researchers Create Nanoscale Particles For Ultrasound Applications
August 16, 2010, 3:44 PM
NCSU Study To Help Understand Nanoparticles Inside the Body
August 16, 2010, 8:38 AM
New Lithium Metal Phosphate Batteries Made With Wax and Soap
August 13, 2010, 1:10 PM
Creationists are Mad About Google Doodle Depicting Evolution
November 24, 2015, 8:48 PM
DHS and TSA: Whoops, We Missed That 73 Airport Employees May be Terrorists
November 19, 2015, 2:16 PM
Star Wars Spinoff Film "Rogue One", Theme Park Attractions Announced
August 17, 2015, 12:20 PM
SpaceX Falcon 9's Seventh Supply Mission to ISS Ends w/ Fiery Stage 1 Explosion
June 28, 2015, 1:10 PM
Cool Science Video: Glowing Millipede Prowls the Nevada Desert
May 18, 2015, 12:00 PM
Newly Discovered Costa Rican Glass Frog is Kermit's Doppelgänger
April 22, 2015, 11:26 AM
Most Popular Articles
Top 5 Smart Watches
July 21, 2016, 11:48 PM
Free Windows 10 offer ends July 29th, 2016: 10 Reasons to Upgrade Immediately
July 22, 2016, 9:19 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information