NIST Smooths Out "Roughness" Debate with High Tech Lasers
January 19, 2008 10:27 AM
Testing sheet metals and stamping dies costs the automotive industry tons of cash, and it's all wrong, wrong, wrong
Sheet metal isn't high-tech stuff, but a lot of work goes into getting it right when it comes to things like the automotive industry. The surface of a stamped piece of metal is an indicator to the amount of stress it can handle and how, when and where it may fail. The standard method of measurement for surface profiling is being called into question for its accuracy after findings from a group of NIST researchers.
Traditionally, the measurements in question were done with an instrument called a profilometer. The simple device, similar to a phonograph needle, is drawn in a line over the surface of a material to measure the often microscopic terrain. After repeated tests, the data from the instrument is averaged to make a "roughness" measurement.
Unfortunately, as the NIST research shows, this method may be terribly inaccurate due to uncertainties and statistical errors when the measurements are extrapolated into a three-dimensional surface.
Rather than using a two-dimensional technique like the profilometer, Mark Stoudt, Joseph Hubbard and Stanley Janet of NIST use an instrument called a scanning laser confocal microscope to make a point-by-point image of a surface. The measured area from one image is roughly 1000 x 800 micrometers long and wide by 20 micrometers deep. The data from each point is then analyzed simultaneously using mathematical techniques to give a more accurate measurement than could be obtained by two-dimensional methods.
One discovery already made on aluminum alloy used in the study is that the generally accepted linear relationship between surface roughness and material deformation for the alloy is wrong. Data from the research suggests a more complicated relationship was hidden by the uncertainties of linear profilometers.
This and the rest of their findings have been published in a paper titled "Using Matrix Methods to Characterize Evolution of Deformation Induced Surface Roughness in Aluminum Sheet" in the journal
Materials Science and Technology
"A politician stumbles over himself... Then they pick it out. They edit it. He runs the clip, and then he makes a funny face, and the whole audience has a Pavlovian response." -- Joe Scarborough on John Stewart over Jim Cramer
Latest By Levi Beckerson
Of Turbines Large And Small
May 24, 2011, 9:07 AM
Various Alcohols Shown To Make Various Improvements on Specific Superconductor
January 11, 2011, 8:32 AM
Genetics and Taste Buds; Can Science Build Better Chocolate?
December 27, 2010, 9:01 AM
New UMass Technique Seeks to Replace Petroleum for Industrial Chemicals
November 26, 2010, 7:26 AM
New MIT Nanotech Fights Cancer Naturally
September 20, 2010, 8:30 AM
Genetic Modification Turns Killers Into Saviors
September 16, 2010, 1:13 PM
New Rensselaer Nanocomposite Kills Staph
August 17, 2010, 8:10 AM
Researchers Create Nanoscale Particles For Ultrasound Applications
August 16, 2010, 3:44 PM
NCSU Study To Help Understand Nanoparticles Inside the Body
August 16, 2010, 8:38 AM
New Lithium Metal Phosphate Batteries Made With Wax and Soap
August 13, 2010, 1:10 PM
PIQ ROBOTTM reveals its new artificial intelligence software
November 29, 2016, 12:59 AM
One more time - Happy Thanksgiving to Everyone Around the World
November 24, 2016, 4:00 AM
Google’s Smart Contact Lens Project gets halted for 2016
November 20, 2016, 7:00 AM
Cell Research Study shows African Americans have greater immune response to infection
November 10, 2016, 1:00 AM
UTHealth Clinical Trial Shows Progress Using Stem Cells to Treat Traumatic Brain Injury
November 8, 2016, 1:00 AM
Uber Partners with Circulation to Pilot Program Connecting Transportation and Digital Health Care
November 6, 2016, 5:00 AM
Most Popular Articles
Surface Pro 5 Rumors - New Release Date and Price
April 22, 2017, 6:45 AM
Apple Watch NikeLab Limited Edition unveiled.
April 22, 2017, 6:20 AM
Motorola Moto G5 Pus – Well Worth Considering Over the Others
April 25, 2017, 7:06 AM
SAPPHIRE PULSE Radeon RX 580 8GD5 – Great Value for the Money
April 20, 2017, 7:47 AM
Meet the Smartphone with four cameras - Alcatel Flashphone
April 5, 2017, 11:20 AM
Latest Blog Posts
Galaxy Note 8 – Available Second Half 2017
Apr 28, 2017, 7:30 AM
Google Android App – Huge improvement on Nighttime Photography
Apr 27, 2017, 7:40 AM
Google Co-Founder, Sergey Brin has an Airship
Apr 26, 2017, 6:43 AM
Samsung Galaxy S8 and S8 Plus – Lots of Glass that Breaks Easily
Apr 25, 2017, 7:20 AM
Samsung Galaxy S8 – Warning for Pet Owners
Apr 24, 2017, 5:59 AM
Sound Bars and the Costs?
Apr 23, 2017, 6:30 AM
Link your Brain to Your Computer – In Four Years…Maybe
Apr 22, 2017, 7:03 AM
Google Home can now identify users by their voice.
Apr 21, 2017, 7:15 AM
Amazon Lex – Now Available for Developers.
Apr 20, 2017, 6:58 AM
You can now use Instagram offline on your Android Smartphone
Apr 19, 2017, 8:00 AM
Now you can livestream to YouTube from your mobile device.
Apr 18, 2017, 8:05 AM
Google Home – Is It a Spy Device?
Apr 17, 2017, 7:30 AM
Apple added to self –driving test permit list
Apr 15, 2017, 6:21 AM
Project Scorpio – Coming on June 11
Apr 14, 2017, 6:20 AM
Looks Like Samsung Has Been Forgiven.
Apr 13, 2017, 6:50 AM
United Airlines - Blasted on China’s Social Network and the Stock Market
Apr 12, 2017, 6:50 AM
Amazon's Third-Party Sellers Hacked
Apr 11, 2017, 6:25 AM
Microsoft Surface Pro5 Details Revealed
Apr 9, 2017, 6:41 AM
Own An Android Phone? Then you could be hacked over Wi-FI
Apr 7, 2017, 6:47 AM
Apple confirms iOS 10.3 bug and its effect on iCloud Services
Apr 6, 2017, 6:30 AM
Apple Rolls Out New Version of Apple Music
Apr 5, 2017, 10:35 AM
Apple in the News
Apr 4, 2017, 9:03 AM
More Blog Posts
Copyright 2017 DailyTech LLC. -
Terms, Conditions & Privacy Information